BICYCLE COUNTER SIGMA BASE BC LINE. Wired or wireless bike computer, 4 sturdy models to choose: // // // WL. SIGMA BASE BC
No wires means easy removal and no hideous cable-mess.
Fitting is easy. There are three main sections.
A magnet which screws onto the spokes, a transmitter which counts the revolutions and a head-unit that sits up-top on the handlebars. The transmitter fixes on with a rubber band, which is supplied and looks something like a black o-ring.
The head unit clicks into a plastic bracket which is also attached by rubber band, but which also has a sticker bike computer wireless sigma and can stay on permanently.
The setup is a bit of a pain. Description of Sigma Sport BC 9. The BC 9.
Highlights Nine functions and more In additional to the functions found in a classic bicycle computer, the BC 9. Features at a glance: Need a Break?
Yet, at the same time, we you also want batteries to last a long time. With the new ATS transmission system, when you stop and take a break during a ride for up to two hours, the computer will auto wake without spin bike computer a button.
When you see the antenna icon on the display, that means that the auto wake function is active. bike computer wireless sigma
If the antenna is not shown, it means that the BC9. Simply press any button to start riding again.
Maximum speed display On a single screen, the BC9. Speed comparison The BC 9. When there is a difference, the result is indicated by an upward or downward arrow.
Predefined tire sizes Setting the wheel size is extremely easy using the tire size. This means it is looking for a signal.
If there are no flashing zeros then it is not mounted properly or there is something wrong with the mount. There are silver contacts on the mount and contacts on the computer that need to touch.
bike computer wireless sigma
Make sure the mount is not bent, warped or broken in a way that causes the contacts not to touch. Do you see a green light on the transmitter when the magnet passes by?
By the "Sigma" logo on the speed and cadence transmitter you will see a green LED compuetr when the magnet passes by the first bike computer wireless sigma times. If you do not see a green LED then it is not picking up the magnet or the battery in the transmitter is dead.
Two wheel sizes can be programmed into the BC For the wired version, choose bike 1 or bike 2 in the settings menu. The STS wireless version automatically switches from bike sifma or bike 2 based on the transmitter signal.
Thanks to an integrated memory chip in the computer head unit, all the total values and settings are permanently stored in the device. After changing the battery, you therefore only need to biks the time.
All BC The battery level of the computer head and each transmitter is checked at regular intervals. If a battery is low, an early warning is displayed on the computer screen.
When service is due, a bike vomputer icon will appear on your screen at the start of a ride. Sigma does provide industrial strength rubber bands for the mount and bike computer wireless sigma as well, but the rubber bands don't take care of the wires you must feed all along your bike — that is what zip-ties are for.
The attaches to the mount on your handlebar, and then wireoess wire must wrap around your brake cable and run down the left side of your front fork bike computer wireless sigma a sensor that can be banded there. Another wire must run along your down-tube to the bottom bracket, where it can be secured.
The sensor on the fork is for speed, and had to be bike computer wireless sigma quite high because the spoke magnet doesn't fit blade spokes very well. The sensor on the bottom bracket has to be aligned with the cadence pod zip-tied to the crank.
The wires are extra long, so doubling them up and zip-tying them down is your only choice. The Sigma is a good choice for road cyclists.
News:Hands down the Garmin I've used mine for nearly two years and miles of training, touring and racing. It's been 99% trouble-free. But the main reason.
Leave a Comment